Store LocatorStore Locator

DIY Wooden Christmas Presents

DIY Wooden Christmas Presents
DIY Front Porch Décor

Here's what you need:

1" x 10" x 8' Spruce

Pencil

Tape measure

Chop saw

Sanding block

Beauti-Tone Interior/Exterior Latex Paint Eggshell Finish – sample cans in the shades:

Powdered Donuts WB024-0 (white)

Simon Says A20-1-1449-3 (red)

Jungle Adventure C33-1-0739-3 (green)

Paint brush

Garland/greenery

Ribbon

Wire

Hot glue gun


Here's How:

Using a chop saw, cut the 1" x 10" x 8' spruce into the 3 different sized sections: 3', 2', and 1'. Afterward, sand and smooth all the edges.

Cut with chop saw
3 different sized sections

Next, paint the pieces of wood using festive shades of Beauti-Tone Paint. Powdered Donuts (WB024-0), Simon Says (A20-1-1449-3), and Jungle Adventure (C33-1-0739-3) create perfect Christmas tones. 

After the paint dries, it’s time to turn them into presents. Add ribbon vertically around the length of the entire board and hot glue it together and to the wood. Then add the horizontal ribbon and hot glue, overlapping the vertical ribbon on the back. Using a small piece of wire, cinch the ribbon on the front of the present. 

Glue ribbon
Cinch ribbon with wire

Cut a few pieces of greenery from garland and hot glue it behind the ribbon. Secure a bow with additional wire to the front of the present, which hides all the glue and wire. 

That's it! This was one of my favourite and easiest projects to date! This project can easily be customized to fit your seasonal décor year after year by simply switching out the paint colour and ribbon to match your décor theme. 

DIY Wooden Christmas Presents, angle
DIY Wooden Christmas Presents

Inspiration is always handy

© 2018 Home Hardware Stores Limited. All rights reserved.