Who would guess that some basic hardware, wooden doweling and copper pipe could transform into a contemporary, designer coat rack for your front foyer?
Tools
- Belt sander
- Table saw 1346-636
- Drill press 1334-373
- 3” hole saw 1267-990
- 5” hole saw 1267-994
- Pipe cutter 8676-747
- Soldering iron 1138-215
- Solder 1139-580
Shopping List
- (3) 1-1/4” dowels x 8’ 2624-469
- 1-1/4” copper pipe x 5’ 3249-309
- 8/4” x 6” pine x 1’ length
- 400 grit sandpaper 1061-071
- Wood glue 2020-067
- #14 copper wire x 40’ 3687-702
- Electrical tape 3680-165
- Finishing oil 4548-181
Here's How
Legs
- Taper bottom of 8’ dowels to 5/8” diameter on a belt sander.
- Using the pipe cutter, cut the copper pipe into 3 pieces 10” long and 3 pieces 7” long. Remove the burr from one end of each piece.