Here’s How to Paint Your Front Door

Cleaner

Painter’s Tape

Sandpaper/Sanding Block

Paint Roller

Exterior Paint

Exterior Primer

Paint Brush

Step #1: Tape or Remove Hardware

Start by removing or taping off all hardware on the door to ensure a clean and professional finish.

Step #2: Clean Thoroughly

Use TSP Plus to remove any dirt or grime from the surface of the door. Rinse well to ensure a clean canvas for painting.

Step #3: Sand and Wipe Clean

Lightly sand the entire door with 120-grit sandpaper to create a smooth surface for painting. Wipe away any debris or dust to ensure the door is clean, dry, and dull.

Step #4: Prime Your Door

Apply a coat of BeautiTone STICK-iT primer or an oil primer if your door is made of wood. Allow the primer to dry for 24 hours to ensure proper adhesion and durability.

Step #5: Choose Your Colour

Choose a BeautiTone 100% Acrylic Trim and Door paint colour.

Step #6: Paint Like a Pro

Plan your painting strategy and work in small sections for optimal results. Use an angled brush to paint insets and trim, then switch to a roller for flat surfaces. Be sure to allow sufficient drying between coats to allow sufficient drying for a smooth and even finish.

Step #7: Apply Additional Coats as Needed

Apply a second thin coat of paint to your door. For darker colours, you may need to apply a third coat. Take your time and ensure each coat is applied evenly for professional-looking results.

Step #8: Project Complete

Once additional coats are dry, your door makeover is complete. Step back and admire the transformation!